Save 50% on All Advanced Expo Pass(s)

Call 1-866-754-9334 or Fill in Form Below

Get FREE EXPO PASS by entering Coupon Code

All Advanced Tickets will be eligible for Door Prizes


Logosol PH365

With the LOGOSOL PH365 you can produce complex profiles in one operation. For example, you can produce material for window manufacturing. This machine is the large four-sided planer/moulder PH360 that has been equipped with a unique fifth cutter. This cutter unit is developed from LOGOSOL’s vertical milling machine MF30. It differs from everything else on the market by being able to be tilted through 270 degrees. This means that you can machine the workpiece from below, from the side or from above. You work efficiently with quick settings!
A machine of possibilities
For the LOGOSOL PH365 there are a wide range of endmills, brushes and sanding rollers. Ideal when you want to have an extra fine result.
With the fifth cutter you can produce elaborate products in one operation. This machine saves valuable time in the woodworking shop and adds competitiveness to your business.
• Polishing for a perfect surface finish. 
• Brushing 
• Endmilling 
• Sanding 
• Roughening surfaces before painting. 
• Moulding with very deep profile (up to 50 mm)
Remember that most of the tools for the Multimill MF30 also fit the five-cutter planer/moulder PH365!
• The fifth cutter head can be tilted through 270 degrees.
• Quick settings.
• 30 mm spindle shafts, a wide range of sanding and brushing tools.
• Can be equipped with high-speed spindle for end mills.
• Separate motor for each cutter. You can do complex processing with all sorts of wood!
• Big vision panel in the cover. Easy to monitor the process.


If you didn't see your question, go ahead and ask your question!



To take full advantage of the free Expo Tools like Notes, Add to schedule, Save Favourites, Book Appointments, Pre-events you will need to Login/Register