CONTACT US >>> GET YOUR EXPO PASS <<<   SIGN IN

Save 50% on All Advanced Expo Pass(s)

Call 1-866-754-9334 or Fill in Form Below

Get FREE EXPO PASS by entering Coupon Code

All Advanced Tickets will be eligible for Door Prizes

×

Logosol PH360

A stable four-head planer/moulder for professional production. This completely new machine has its place in environments such as woodworking shops, timber yards, homebuilding facilities and, naturally, in the construction trade. One and the same machine can mould everything from fine trim work to timber blocks with outstanding results. 
 
Unique stability
 
The powerful cast iron table is the heart of the machine, guaranteeing vibration-free operation. It is bolted onto a stable steel base with solid foundation support. The bottom cutter, side cutters and integrated feeder tables are set into the cast iron table. The top cutter and feed rollers sit in a separate support that is also integrated into the cast iron table by way of oversized trapezoidal bars.
 
A machine that changes size according to material
 
If you are planing small materials, such as panels and strips, the top cutter support lays close down to the table. If you want to feed in five-inch housing timber, the top cutter support shifts to a higher position above the table, and the machine changes height both internally and externally. The machine can shift up to 230 mm (9”) in height!
 
Building around the machine
 
It is often a good idea to try to get started quickly with production when you get your machine home. PH360 essentially requires nothing more than a good chip extractor before you can get started with your first piece of work. You can even mount it on wheels. But this is a machine that is meant to have a system built around it. The feeder tables are at a set height so they are easy to extend and adapt to manage the massive volumes of wood the machine is capable of processing. Having a fixed hose system for chip management also makes for a significant improvement. Keep things organised, clean and straight, and then you'll keep your productivity up!
 
Sufficient capacity
 
Each of the machine’s cutters has its own large motor, sufficient for every imaginable type of processing of every possible type of wood. Feed rate is continuously adjustable up to 30 m/min (98 ft/min). A realistic feed rate for one person to handle is around 6 m/min (20 ft/min), while two people can handle a speed of approximately 15 m/min (49 ft/min) to keep up a smooth work tempo.
 
Perfect results
 
We have taken several measures to make it easier to get perfect results. Among other things, the top cutter has a greater diameter than its predecessor, and it has a double outlet for chip extraction to keep things truly clean and clear and reduce the risk of chip marking. The feeder table has a straight guide that comes in handy when planing flooring, gluing strips, or furniture. A larger and heavier machine is also an automatic advantage when it comes to roughness.
 
Impressive control panel
 
All the settings you need can be found on the same side of the machine, which means that the machine can be set up close to a wall, thereby saving space. The handles that set height and width have gauges, so you can easily read off measurements down to a fraction. The lever for rapid setting of the straight guide is easily accessible from the feed table, and therefore also close to the control panel. There is a separate start, stop and lamp for each cutter and for the feeder unit.
 

QUESTIONS

If you didn't see your question, go ahead and ask your question!

LOGIN/REGISTER ×

LOGIN/REGISTER ×

To take full advantage of the free Expo Tools like Notes, Add to schedule, Save Favourites, Book Appointments, Pre-events you will need to Login/Register

LOGIN/REGISTER ×